[Camera]

• Full bus powered (i.e. no external power is required)
• Adopt USB 2.0 interface, Plug-and-Play 
• Adopt industrial high performance device driver
• 1 Input/1 Output TTL type digital I/O lines (options)*
• Free and powerful SDK OVK-Lite helps user to acquire image even in 1minute 
• SDK provides the function of image management---Image Queue, support multi-threaded processing
• Support long exposure mode, it also can acquire an image clearly in darker conditions
• Support dynamic range mode, it also can acquire an image clearly in higher contrast
• Free and powerful Camera Grab Tool software helps user to measure geometric shape precisely and easily
• Provide automatic LED Light and sensor exposure sync mode, the LED light will start to light and the sensor will start to exposure at the same time. Note! This function is only for Cyclops Series camera to use.
  *The max input current of digital input is 25mA. Standard TTL.  To avoid the digital input damaging, we suggest user to use optical coupler OC) or relay to input the current indirectly, if user used power supply to input the current.

[Camera]

• Greylevel  752x480 @ 64 fps、1/3” sensor
• Global Shutter readout mode
• Internal sync mode, CYCLOPS applies to static object to precision measure or detect
• Build-in irregular pixel correcting circuit
• Support real-time Horizontal and vertical flip
• WOI (Window of interesting) is supported for flexible resolution output
• Support Horizontal and vertical sub-sampling (over up to 2x) mode, in this mode it can decrease output resolution and increase frame rate
• The maximum pixel rate is about 23.10  MP/s.
• Compatible with popular operating systems:
  32-Bits: Windows 7、8、8.1
  64-Bits: Windows 7、8、8.1、10、11
• Adopt industrial connector with robust screw-locker to prevent to slip
• If users buy camera, they can get a 2-meter USB cable (general)  for free. However, additional payment will be charged if they want a USB cable exceeding 2 meters.

[LED Power Dimmer]

• Build-in one channel LED power dimmer, helps user to control the LED by using software directly
• Standard 12V @1.0A(Max) industrial DC output
• Provide stable current output; [1.2W]12V/100mA、[2W]12V/166mA、[6W]12V/500mA、[12W]12V/1000mA* current output; CYCLOPS U Series Camera applies to any type of 12V LED light module.
  *[12W]12V/1.0A recently launched
• Adopt stable voltage protection and stable current control
• Using software to control switch and illumination (1024 level)
• Support normal、high power and super high power LED light module (two pin connector interface).
• Tightly integrated with CYCLOPS Series Camera, using AxAltairU component to control power dimmer directly
• Adopt DC24V external power.

2015 Cyclops Dimension

Cyclops Dimension 3D

 

 

iten	contents
Sensor Type	CMOS
Sensor Resolution	Active：752(H) x 480(V)
Effective Image Area	4.510 x 2.880 (mm)
Sensor Format	1/3”
Pixel Dimension	6.0 x 6.0 μm  Square Pixel
Video Output	8 bits Greylevel
Max. Frame Rate	64 fps ; Default = 60 fps
Dynamic Range	>60.0 dB
Electronic Shutter	Global Shutter
Fill Factor	48 %
FPN	0.1 %
PRNU	1.5 %
Operation Mode	Video and Standby Mode
Scanning Mode	Progressive Scan
Gain / Offset	Programmable Gain / Offset Adjustment
Frame Rate Control	Programmable from 15 to 64 FPS at full frame output
Sub-sampling Mode	Vertical and Horizontal Sub-sampling
Black Level Compensation	Automatically Compensate by Hardwired Circuit
Windowing	WOI ( Window of Interest )
Digital Data Interface	USB 2.0 ,480 MBits/s
Power Consumption	< 450 mW, USB Bus Powered Only , No external power required
Operation Temp.	0.0 ℃ ~ 60.0 ℃
LED Power Consumption	1.2W(100mA)/ 2W(166mA)/ 6W(500mA)/ 12W(1.0A) recently launched
LED Power Dimmer	DC24V external power,  stable current feedback control,  illumination control(0~1024 level)
Dimension (mm)	38x38x48.3
Weight (g)	104